Description
-
For removing bearings, gears, discs, etc. for tight or difficult-to-access spaces.
-
Standard pulling hook with quick adjusting capability quick adjust.
-
Parallel pulling hooks in every position, even with a full load.
-
Pulling hooks with infinitely variable adjustment on the cross-beam.
-
Optimal adjustment of the spindle to the shaft with a 2-sided spindle tip (ball and tip).
-
Mechanical pressure screw.
-
Milled thread treated with a special coating.
-
Two-arm design for space-saving operation.
-
MPN #: 30-10+S
-
Shipping Disclaimer: If the product has to ship directly from the manufacturer it may take 5-7 business days.
|
Technical attribute |
Metric |
Imperial |
|
Spread |
27 - 130 mm |
1 1/16 - 5 1/8 inch |
|
Depth |
100 mm |
3 7/8 inch |
|
Spread used internal |
70 - 180 mm |
2 3/4 - 7 1/8 inch |
|
Space below |
2,6 mm |
1/8 inch |
|
Space next to it |
14 mm |
5/8 inch |
|
Hexagon drive (male) |
17 mm |
|
|
Maximum load |
3 t |
3 US t |
|
Maximum torque |
40 Nm |
29.5 ft lb |
|
Weight |
1.54 kg |
|
|
Jaws |
3 |
3 |
Advantage
-
A manual adjustment knurl allows rapid loosening and adjusting of the extractor jaws on the cross-beam without using a wrench.
-
It can be installed on various pulling hooks and variable reach thanks to jaw extensions.
-
Turning the pulling hooks enables them to be used both internally and externally.
-
Suitable for pulling asymmetric workpieces.
-
The spindle headband prevents the wrench from slipping off.
-
Cross-beam with a hexagonal profile for good grip.
-
Almost all components are available as replacement parts, a time-saving order process thanks to the numbering system.
-
Hydraulic spindle series 8-0 for particularly tight parts, available from a particular puller size.
-
Auxiliary hydraulic ram series 9 for particularly tight parts, can be used from a particular puller size.
-
Note: Pressure pads from series 600-17 are a good addition if the shaft is hollow and the spindle cannot be supported.
-
Stability support from optional series 219 clamp.
KUKKO quality standards
-
Quality made in Germany.
-
Strong design, high performance and long service life.
-
Self-healing corrosion protection KUKKoating for galvanized parts (WITHOUT chrom VI).
-
Safety label to ensure the protection of intellectual property.
-
A tube of KUKKO special grease is included for the pressure spindle.
Functionality
-
Pullers with sliding, parallel jaws